Integration on Offer Level
Integration on Offer Level is the fastest and easiest with Everflow by placing a Clickshield Link inside the corresponding Everflow Offer Redirect URL.
1. Create the Everflow integration
2. Select Dynamic Redirect URL
Select Dynamic URL Redirect from the Tab Menu. The URL is a preconfigured Redirect URL that can be inserted into Everflow and is compatible with Everflow parameters.
The Redirect URL of the Landing Page can be inserted in the URL Wizard. Generated links are saved in the section below for future use.
Network Wide Integration
For cases where all the traffic of the Everflow Domain shall be screened this requires a different and a bit more complex set up. Domain Access to the Traffic Domain is required as well as 2 Everflow Tracking Domains set up in Everflow. The diagram below illustrates the Integration schema.
1. Create the Everflow integration
2. Define the Tracking Domains and Fallback URLs.
To define where accepted traffic shall be routed to. This should be the tracking Domain where accepted traffic gets send to. Beware that the Tracking Domain must not be your existing main tracking domain. You should be selecting a newly set up Tracking Domain of Everflow.
3. Domain Setup of existing Tracking Domain
In order to screen the existing tracking links with Everflow and not having to change the Affiliate Links we need to point the existing tracking domain to Clickshield. If you are not sure how to do this reach our to your Domain Administrator to help you with this.
Follow the instructions on the Screen. To implement this we need 3 changes on the Domain Level.
a) TXT Verification - This is to verify that you are actually the owner of this Domain
b) CNAME Setup - This is to point incoming traffic to Clickshield servers
c) SSL Setup - In the case you need SSL Links we can autogenerate a free SSL certificate. To do this you need to verify this by adding another entry to your Domain.
4. Test everything
To avoid any tracking issues please ensure to always test the se up after you have made these changes. Do this by clicking on a regular affiliate link and you should be redirected to the intended offer or the defined Fallback URL.
In the case of any issues we recommend to revert the changes and contact our support.